Senior Analog Director PCIe Gen7, UCIe

Job description

Technology Expert, PCIe 7.0 & UCIe ( Senior Director level / Director )
www.omnidesigntech.com
Location: Bengaluru / Hyderabad
www.omnidesigntech.com
Location- Bangalore
About Omni Design Technologies
Omni Design Technologies is a leading provider of high-performance, ultra-low power IP cores, from 28nm down through advanced FinFET nodes, which enable differentiated system-on-chip (SoC), in applications ranging from 5G, wireline and optical communications, LiDAR, radar, automotive networking, AI, image sensors, and the internet-of-things (IoT).
Our data converter (ADC and DAC) IP cores range from 6-bit to 14-bit resolution and from a few MSPS to more than 100 GSPS sampling rates.

Omni Design, founded in 2015 by semiconductor industry veterans, has an excellent track record of innovation and collaboration with customers to enable their success.

The company is headquartered in Milpitas, California with additional design centers in Fort Collins-Colorado, Bangalore-India, Hyderabad-India, Dublin-Ireland, Boston-Massachusetts.
Job Summary: Principal SerDes Technology Expert
We are seeking a highly motivated and experienced Principal SerDes Technology Expert to lead the development of next-generation connectivity solutions.

Your journey will begin by spearheading the design and optimization of high-performance Active Electrical Cables (AECs), enhancing electrical integrity and signal quality across demanding link budgets.

Building on this foundation, you will architect and implement SerDes technology tailored for PCIe 7.0, tackling challenges such as lane equalization, jitter tolerance, and power efficiency.

Finally, your work will expand into integrating cutting-edge optical interconnects and optocouplers, driving innovations in retimer technologies and hybrid signaling frameworks.
This role directly impacts the performance and reliability of AI and cloud infrastructure—empowering massive data throughput, energy-efficient links, and scalable system architectures.
Responsibilities:
Lead the architecture and design of high-speed SerDes for PCIe 7.0, targeting data rates of 128 GT/s and beyond.
Spearhead the development and integration of advanced optical interconnects and retimer solutions within our Smart Cable Modules™.
Define and specify the requirements for mixed-signal SerDes PHYs, including transmitter (TX), receiver (RX), and clock and data recovery (CDR) circuits.
Conduct in-depth analysis and simulation of high-speed channel performance, including signal integrity (SI) and power integrity (PI).
Collaborate with cross-functional teams, including hardware design, firmware, and system validation, to ensure successful product development and bring-up.
Stay at the forefront of industry standards and emerging technologies, particularly related to PCIe, CXL, and high-speed optical interconnects.
Mentor junior engineers and provide technical leadership across the organization.
Work closely with partners and vendors to evaluate and select key components.
Qualifications:
Required Qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field.
15-25 years years of experience in high-speed SerDes design and development.
Proven expertise in PCIe protocols, with direct experience in PCIe 4.0/5.0/6.0 design and a strong understanding of the upcoming PCIe 7.0 specification.
In-depth knowledge of mixed-signal design, including experience with PAM4 signaling, equalization techniques (e.g., FFE, DFE), and clocking architectures.
Hands-on experience with high-speed test and measurement equipment (e.g., oscilloscopes, BERTs, VNAs).
Strong understanding of signal integrity principles and experience with simulation tools (e.g., HSPICE, ADS, Ansys).
Preferred Qualifications:
Master's or Ph.D. in a relevant technical field.
Experience with the design and integration of optical interconnects, silicon photonics, or high-speed optoelectronics.
Familiarity with the design of retimers and their application in Active Electrical Cables.
Experience with high-level modeling of SerDes links using tools like MATLAB or Python.
Knowledge of other high-speed protocols such as Ethernet, CXL, or NVLink.
A track record of leading complex projects from concept to production.
Excellent communication and interpersonal skills.
We are seeking a highly skilled and experienced IP Design Engineer to join our team,
focusing on the design, development, and validation of cutting-edge high-speed
interface Intellectual Property (IP).

The ideal candidate will have a strong background in
complex digital and mixed-signal design, with a particular emphasis on interfaces such
as UCIe, Die-to-Die (D2D), and various memory PHYs (DDR/LPDDR).

Expertise in
advanced clocking architectures including PLLs and DLLs is also essential.
This role involves contributing to the full IP development lifecycle, from architectural
definition and RTL design to silicon validation and post-silicon support, ensuring first-
pass silicon success for critical products that enable next-generation data center
interconnects.
Key Responsibilities:
• Design & Development: Architect, design, and implement high-speed interface
IPs, including UCIe, D2D, DDR, and LPDDR PHYs. Contribute to the development
of high-speed SerDes IP transceivers supporting rates like 100G PAM4 (106.25
Gbps), 50G PAM4 (53.125 Gbps), and 25G NRZ (26.5625 Gbps) for applications
such as PCIe, Ethernet, and data center interconnects.
• Clocking Design: Develop and optimize PLL (Phase-Locked Loop) and DLL (Delay-
Locked Loop) circuits for high-speed clock generation and synchronization,
ensuring low jitter and high accuracy.

This includes experience with
Fractional/Spread-spectrum/Integer Frequency synthesizers, LC VCOs, Multi-
Modulus Dividers, Charge Pumps, LPFs, LDO regulators, and BGRs.
• IP Development Lifecycle: Participate in the complete IP design flow, including
architectural definition, specification development, RTL coding, synthesis, static
timing analysis (STA), and collaborating on physical design activities (GDSII).
1
• Verification & Validation: Work closely with verification teams to define test plans,
debug complex design issues, and lead pre-silicon and post-silicon validation
efforts, including silicon bring-up and characterization
.2 Implement features for
deep in-cable diagnostics (e.g., eye metric readout, PRBS bit error rate, loopback
modes), fleet management, and security for robust interconnect solutions.
• Analog/Mixed-Signal Integration: Collaborate on the integration of analog and
mixed-signal blocks within the PHYs, addressing complex integration challenges
and optimizing for performance, power, and area (PPA).
• Documentation: Create comprehensive design specifications, integration
guidelines, and application notes for IP blocks.• Problem Solving: Debug and resolve complex design issues at various stages of
the development cycle, including silicon debugging and fault isolation.
• Standards Compliance: Ensure IP designs comply with industry standards (e.g.,
JEDEC for DDR/LPDDR, QSFP-DD/OSFP mechanical and common management
interface specifications) and customer requirements.
• Performance Optimization: Focus on achieving low-latency data paths (
and optimizing for lower power consumption in high-speed interconnect
solutions.
Required Qualifications:
• Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering,
or a related field.3
• 15-25 years of experience in digital, mixed-signal, or analog IP design within the
semiconductor industry.

(Adjust X based on Senior/Principal level).
• Proven experience with high-speed interface designs such as UCIe, D2D, DDR
PHY, or LPDDR PHY.
• Demonstrated experience in the design and optimization of PLLs and/or DLLs,
including various types of frequency synthesizers and clock generation circuits.
• Familiarity with the entire IP development flow from architectural concept to
silicon validation.
• Strong understanding of signal integrity, power integrity, and layout considerations
for high-speed designs, especially for PAM4 and NRZ signaling over copper
cables.
• Proficiency with industry-standard EDA tools for design, simulation, and analysis.
• Experience with deep diagnostic features, security implementations (firmware
security, unauthorized access prevention), and non-disruptive firmware updates
for high-speed modules.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills to work effectively with cross-
functional teams.
Contact:
Uday
Mulya Technologies
muday_bhaskar@yahoo.com
Mining The Knowledge Community

Required Skill Profession

Operations Specialties Managers